7 mil Dacron® polyester woven splicing tape
|Thickness: ||7 mils (175 microns)|
|Tensile Strength: ||260 lbs/in (2275 Newtons/5cm)|
|Flexural Strength: ||15,000 cycles minimum (wet/dry)|
|Belt Grit Range: ||24 and finer|
These items are provided as general information only. They are approximate values and are not considered part of the product specification.
ADK 5-P is a strong, flexible, wear resistant, biased splicing taped for use on abrasive belt butt splices with flexible X and J weight cloth backings. ADK 5-P is recommended for applications that require high flexibility and is particularly well suited for very narrow belts under 1”. In addition, ADK 5-P can be used with glue bond, resin/glue, full resin and waterproof coated abrasives for narrow and wide belts.
ADK 5-P is a specially designed square weave fabric with low stretch characteristics. This feature allows ADK 5-P to be pulled through loop type knife coaters without the stretching and distortion commonly found with unbalanced woven tape constructions. ADK 5-P has also been saturated with our exclusive primer system for increased adhesion.
Woven ADK tapes are advantageously used in a two-way adhesive application using contact bonding under pressure with heat activation. The following are suggested parameters which have been successfully employed in joining endless abrasive belts:
|Adhesive Type:||Linear Polyester Polyurethane|
|Adhesive Application to Tape:||1.5-2.0 mils (37.5-50 microns)|
|Adhesive Application to Backing:||3-12 oz/yd2 (100-400 gm/m2)|
|Drying Time:||10-30 minutes at room temperature depending on the amount of curing agent and relative humidity.|
| Time:||10-20 seconds|
| Temperature:||72-150°F (23-65°C)|
| Pressure:||2000 PSI (140 kg/cm2)|
| Temperature:||Room Temperature|
| Time:||Full cure will develop betweenn 48 and 72 hours.|
ADK 5-P is stable for at least 1 year when stored under cook, dry conditions (about 72°F/23°C). It must be protected from exposure to humidity and direct sunlight.
Health and Safety Information
Appropriate literature has been assembled which provides information concerning the health and safety concerns that must be observed when handling this product. Before working with this product, personnel must read and become familiar with the available information concerning its hazards, proper use and handling. This cannot be overemphasized. Information is available in several forms, i.e., Material Safety Data Sheets and product labels. Consult your Adirondack representative if you have not received this literature.
THE CONDITIONS OF YOUR USE AND APPLICATION OF OUR PRODUCTS AND INFORMATION (WHETHER VERBAL, WRITTEN OR BY WAY OF PRODUCTION EVALUATION), INCLUDING ANY SUGGESTED FORMULATIONS AND RECOMMENDATIONS, ARE BEYOND OUR CONTROL. THEREFORE, IT IS IMPERATIVE THAT YOU TEST OUR PRODUCTS AND INFORMATION TO DETERMINE TO YOUR OWN SATISFACTION WHETHER THEY ARE SUITABLE FOR YOUR INTENDED USES AND APPLICATIONS. THIS APPLICATION SPECIFIC ANALYSIS AT LEAST MUST INCLUDE TESTING TO DETERMINE SUITABILITY FROM A TECHNICAL AS WELL AS HEALTH, SAFELY AND ENVIRONMENTAL STANDPOINT. SUCH TESTING HAS NOT NECESSARILY BEEN DONE BY ADIRONDACK. ALL INFORMATION IS GIVEN WITHOUT WARRANTY OR GUARANTEE. ADIRONDACK SPECIALTY ADHESIVES, INC. DISCLAIMS ANY LIABILITY, IN NEGLIGENCE OR OTHERWISE, INCURRED IN CONNECTION WITH THE USE OF OUR PRODUCTS AND INFORMATION. ANY STATEMENT OR RECOMMENDATION NOT CONTAINED HEREIN IS UNAUTHORIZED AND SHALL NOT BIND ADIRONDACK SPECIALTY ADHESIVES, INC. NOTHING HEREIN SHALL BE CONSTRUED AS A RECOMMENDATION TO USE ANY PRODUCT IN CONFLICT WITH PATENTS COVERING ANY MATERIAL OR ITS USE. NO LICENSE IS IMPLIED OR IN FACT GRANTED UNDER THE CLAIMS OF ANY PATENT.
U.S. and Canada Sales Office:|
Adirondack Specialty Adhesives, Inc.
P.O. Box 13283
4258 Albany Street
Albany, New York 12212
International Sales Office:|
Gerard Kluyskens Co., Inc.
295 Fifth Avenue
New York, New York 10016